Store Location |  (09) 274 9454 | Help

22-05-2022
  • Industrial 8in Jointer-Spiral cutter Head
  • Industrial 8in Jointer-Spiral cutter Head
  • Industrial 8in Jointer-Spiral cutter Head
  • Industrial 8in Jointer-Spiral cutter Head
  • Industrial 8in Jointer-Spiral cutter Head
  • Industrial 8in Jointer-Spiral cutter Head

Industrial 8in Jointer-Spiral cutter Head

Stock Code:
JN-X200C
Price:
$4,399.00 inc GST

Description

New look, new code, same great machine (was CTJ-350X)

The Carba-Tec 8" Industrial Long Bed Jointer. Simply the best jointer in its class bar none! Features an extra long 1950mm bed for superior stock support and a superior parallelogram system for easy and accurate table adjustments. This system also produces less chipping as the tables follow the arc of the cutterblock when the table is raised or lowered. It also allows for more positive adjustment and there is none of the slack frequently found when using ordinary screw-type adjustment wheels. A centre-mounted tilt fence provides solid support and a spiral cutterhead provides a smooth cut at 16,500cpm.

While the cut depth per pass of the helical cutterheads may be less than equivalent standard cutterheads, they offer a number of significant advantages. Spiral cutterheads revolutionise your woodwork, offering quieter cutting as well as less chatter and tear-out in curly or highly figured wood; these cutterheads save hours of cleanup work after dressing timber. This machine's 40 four-sided cutter knives (which can be turned to offer a new cutting edge in seconds) are made of fine grain tungsten carbide and are held in place by a Torx style screw. Knives of this type last three to five times longer than good quality HSS knives. Multiply this by four cutting edges and you achieve 12 to 20 times the normal blade life of a HSS blade set. Easily turned and seated; they present a fully sharpened and indexed cutting edge. No complex blade setting or jigs are required - you simply replace the blade when all four edges have been used. This style of cutterhead also reduces the size of shavings when cutting; increasing the effectiveness of your dust collection setup.

NOTE - NZ machines are sold with Bridge Guards over the cutter rather than the swinging guard shown in the photos

motor 1.5HP, 230V, 1PH, 10A plug
table length 1950mm
table width 200mm
rabbeting capacity 17 x 200mm
fence tilt -45° to +45°
fence stops -45° / 90° / +45°
cutter knives 40 x 4 Sided Tungsten Carbide cutters
dust port 1 x 4"
workshop footprint 1950 x 670 x 1310mm
net weight 230
shipping weight 245

  • Auckland 
    Limited Stock
  • Christchurch 
    Limited Stock