Woodpeckers Precision Woodworking T-Square 600mm + Rack-It
Description
Striking lines parallel with the edge of your stock couldn't be easier, once you have a Woodpeckers Precision T-Square in your shop.
The beam has a lip that rests on the top surface of your stock, preventing the tool from rolling like many T-squares.
Precision machined scribing guides are spaced every 1mm down the length of the blade. Just drop in the point of a mechanical pencil and scribe a perfectly parallel line by holding the pencil in one hand and sliding the T-square with the other.
In addition to the scribing guides, there are ¼" diameter holes on 1" centers, ideal for laying out shelf pins.
Each Woodpeckers T-Square consists of a laser engraved aluminum blade matched to a precision machined beam. The two critical components are secured together with 6 stainless steel screws. A slight offset between the holes in the blade and the threads in the beam put the two under constant tension. This design delivers an angular precision of ±.02 degrees (.004" per foot). It delivers top notch performance yet allows the blade to be replaced should it be damaged.
Two support lips machined into the beam prevent tipping and rolling.
The blade has scribing guides every 1mm. Place the tip of a mechanical pencil in the hole, slide it along your work piece and lay down lines exactly parallel to the edge of your stock.
The edges of the blade are beveled 30°, putting the scale markings right down next to your stock, eliminating parallax error.
The scales are laser-engraved to a tolerance of ±.004" total accumulated error.
The white engraving on our famous "Woodpeckers Red" anodized finish delivers a very readable contrast, even for older eyes or poor lighting conditions.
Each T-Square is delivered with a wall-mountable Rack-It™ to keep your Precision T-square right in plain sight and always ready for the next project.
The 600mm T-Square is best suited for work with sheet goods, larger cabinet parts, entertainment centers and bookcases.
Like all Woodpeckers products, these T-squares are proudly machined and carefully inspected in our Strongsville, OH facility, just south of Cleveland.
-
AucklandLimited Stock
-
ChristchurchSorry, not in stock. Please contact us to backorder
You may also be interested in...
-
-
WP-CSQ-XLM-20
-
AucklandSorry, not in stock. Please contact us to backorder
-
ChristchurchLimited Stock
-
-
-
WP-TS-600-20
-
AucklandLimited Stock
-
ChristchurchSorry, not in stock. Please contact us to backorder
-
