29-03-2024
  • Continuous Sweep Movement - suit dials up to 3/8" (9.5mm) thick
  • Continuous Sweep Movement - suit dials up to 3/8" (9.5mm) thick
  • Continuous Sweep Movement - suit dials up to 3/8" (9.5mm) thick

Continuous Sweep Movement - suit dials up to 3/8" (9.5mm) thick

Stock Code:
CLK-CS11
Price:
$24.50 inc GST

Description

These movements have a second hand that moves in a smooth continuous motion, rather than the stepping motion of most quartz movements.

This change not only affects the appearance of the clocks you make, but continuous sweep movements also have the added benefit of being more quiet.

You will not hear the "clicking" sound every second.

Please do not assume that any clock hands will fit, as the mounting holes are not standardized.

These continuous sweep movements will operate a second hand, but second hands are considered optional.

All models have a 5/16" (7.94mm) shaft diameter so a 3/8" (9.53m) mounting hole is the correct size to drill in your case.

Specifications;

Length of threaded section of the spindle is 7/16" or 11.11mm
For use on a board up to 3/8" or 9.53mm thick
Total length of spindle is 3/4" or 19.05mm
The shaft diameter is 5/16" (7.94mm) so use a 9mm or 3/8 inch drill.

Operates on an AA battery.

  • Auckland 
    Available
  • Christchurch 
    Available